High Flexibility and High-Level Finishes
We design and manufacture custom liquid painting lines, guaranteeing safe, clean work environments with maximum transfer efficiency and control of environmental variables to achieve perfect coatings.
Batch System: Designed for low production, large parts, batches, or high-complexity applications where the operator’s skill is key.
Continuous Lines (Automatic Systems): Designed for high production. They integrate an overhead conveyor, automatic application, and curing oven into a continuous production line.
Pressurized Dry Filter Booths: Essential for high-quality finishes. They inject clean, conditioned air from the ceiling, creating a positive pressure that prevents outside dust from entering. The extraction of air with paint is done through the floor or sides using a three-stage filtering system that guarantees total particle retention before releasing the air into the environment.
Water Wash Booths: The excess paint hits a continuous water cascade. Designed for high production and intensive use, minimizing filter replacement.
Application Booths
Built with galvanized sheet metal, stainless steel, or painted sheet metal panels, designed under strict safety regulations for handling flammable gases and air recirculation.
Lighting is a critical factor in liquid painting so the operator can see the «gloss» and coating in real-time. We use recessed explosion-proof LED fixtures, which guarantee an ideal lux level without generating shadows or ignition risks.
Air Injection and Extraction Systems
Environment control: For proper paint application and adhesion, the air must be clean and at the correct temperature.
Injection: It takes air from the outside, filter it with filter mats, heat it (if necessary), and inject it through the booth ceiling smoothly and downwards. This pushes the excess paint towards the filtering floor without generating turbulences that pollute the part.
Extraction: Explosion-proof centrifugal fans that remove contaminated gases and lowers overspray (excess paint) through the floor or a side wall, passing through filtering stages before releasing the air outside.
Curing Ovens
Production acceleration: They operate at temperatures usually between 40°C and 120°C according to the paint specifications.
It uses forced convection of hot air to accelerate the curing of synthetic enamels, polyurethanes, or epoxies.
It features excellent thermal insulation and hot air injection and controlled extraction systems to evacuate solvent vapors still released during curing, preventing environments with explosion risks.
Paint Kitchens
Fluid control: Secure attached rooms where paints are prepared, mixed, and pumped to the booths.
Equipped with constant ventilation systems, grounding on all components and explosion-proof systems, spill containment, and pneumatic pumps.
It allows feeding automatic guns, Airless, Airmix, or liquid electrostatic systems continuously, keeping paint viscosity and pressure stable at all times.
Overhead Conveyor Systems
The transport system depends on the Production Pace: Garage System (Manual), Monorails, or Power & Free systems that move the parts along the line.
Equipped with frequency inverters to adjust the line speed according to the flash-off and curing time required by each type of paint or part size. The bearings and chains are prepared to support the load weight and are lubricated to withstand the high temperatures inside the oven without deteriorating.
Contact
sales@pesinger.com.ar
rrhh@pesinger.com.ar
Sales: +54 342 612 1255